Bridge Type Rectifier Diode 1N4007 50 to 1000 Volts 1.0 Ampere
Feature
Low coat construction
Low forward voltage drop
Low reverse leakageHigh forward surge current capability
High temperature soldering guaranteed:
260℃/10 secods/.375”(9.5mm)lead leCM GROUPh at 5 lbs(2.3kg) tension
MECHANICAL DATA
Case: Transfer molded plastic
poxy: UL94V-O rate flame retardant
Polarity: Color band denotes cathode end
Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
Mounting position: Any
Weight: 0.012 ounce, 0.33 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
· Ratings at 25OC ambient temperature unless otherwise specified · Single Phase, half wave, 60Hz, resistive or inductive load · For capacitive load derate current by 20%
| Maximum RMS Voltage |
SYMBOLS |
1N4001 |
1N4002 |
1N4003 |
1N4004 |
1N4005 |
1N4006 |
1N4007 |
UNIT |
| Maximum DC Blocking Voltage |
Vrrm
|
50 |
100 |
200 |
400
|
600 |
800 |
1000 |
V |
| Maximum Average Forward Rectified Current 0.375”(9.5mm) lead leCM GROUPh at TA= 25℃ |
Vrms |
35 |
70 |
140 |
280 |
420 |
560 |
700 |
V |
| Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) |
VDC |
50 |
100 |
200 |
400 |
600 |
800 |
100 |
V |
| Maximum Instantaneous Forward Voltage @ 1.0A |
(Av) |
1.0 |
A |
|
Maximum DC Reverse TA = 25℃
Current at Rated DC Blocking TA=100V Voltage per element
|
Ifsm |
5.0 |
µA |
| Vf |
50 |
µA |
| Maximum Full Load Reverse Current, full cycle average 0.375”(9.5mm)lead leCM GROUPh at TL=75℃ |
Ir |
30 |
µA |
| Typical Junction Capacitance (Note 1) |
Cj |
13 |
µA |
| Typical Thermal Resistance (Note 2) |
RθJA |
50 |
℃ /w |
| Operating Junction Temperature Range |
Tj |
-55 to +150 |
℃ |
| Storage Temperature Range |
TSTG |
-55 to +150 |
℃ |
Notes:
1. Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC.
2. Thermal Resistance from junction to terminal 6.0mm2 copper pads to each terminal.
3. The chip size is 40mil×40mil
Product Tags:
|
|
Bridge Type Rectifier Diode 1N4007 50 to 1000 Volts 1.0 Ampere Images
|
